Holly tried her design skills to use with the goal of creating a lightweight quadcopter that shifted the motor positions into a modified V shape. if this is your first build, we suggest starting with the full Flybrix instructions first. Flying V Key Design Features: - Use of angles The arms are attached with hinges making the rear motor place- ment slant backward.
Page 3
Top-down view of the Flying V Quadcopter < Back Next >...
Page 4
Your brick colors may be different than ours, so follow the directions using brick shape. < Back Next >...
Connection Key Motor positioning, props, port connection Prop type Port connection (labeled on the prop) (ports labeled on the flight control board) Motor wire colors < Back Next >...
Page 13
Attach motors and props. Connect motors to the motor ports. Add windshield and connect the battery when you’re ready. < Back Next >...
Props Placed Properly Motors Connected Properly (matching white ticks on motor connectors with the white ticks on the flight control board). Need Help? Visit the Flybrix online forum or email support at support@flybrix.com Happy Flying, Captain! < Back Next >...