Page 3
PLEASE READ THIS CAREFULLY BEFORE USING DT430! Always treat your product with care and keep it in a clean and dust-free place. Do not expose DT430 to moisture or humility. Do not expose DT430 to extreme high or low temperatures.
Page 4
Do not dispose of the battery in fire or water. Do not let the metal contacts on the battery touch and other metal object, it could lead to short-circuit and damage the battery. Important safety information For DT430 model, only approved batteries, chargers that are...
Page 5
DT430 unit. Do not exchange with wrong model battery, it may occur to explosion. Please dispose battery following instruction.
Backlight settings…………….………..………………….. 7 System backup….…………….………..………………….. 7 Getting to know DT430 DT430 overview Name Description Left button Mini SD cover Mini USB cover...
SD card slot Insert external card USB socket Connect to PC for data synchronization ON/OFF button Press to turn on DT430; press and hold to turn off; if DT430 is on, press to suspend Bottom cabinet LED light Show the status for Wi-Fi and battery...
Turn over the handheld terminal. Slide the battery latch to the left slightly, and then lift the battery pack cover up in the direction indicated by the arrow. Insert the battery into the battery compartment. Make sure the end of the battery pack removal tape is put on the above the battery pack.
Page 10
Put DT430 terminal and / or spare battery into the charger cradle. Plug the charger to the main electrical outlet. The LED light turns amber. LED light description There are three LED lights on the front of DT430, the left one has different status:...
Page 11
Red flash: Battery low Red: Battery very low Amber flash: Battery charging Green: Battery full Blue flash quickly: Wi-Fi searching Off: wi-Fi disconnected Description for icons on task bar ActiveSync MSR connected Swipe the card successfully (MSR) Fail to swipe the card (MSR) WLAN connected WLAN searching WLAN disconnected...
The GREEN LED lights on for a second and the boot logo is shown. It will boot to the WinCE OS. To turn off DT430 Press and hold the Power button on the top of DT430 for 2 seconds to turn it off. To suspend DT430...
Connect / Mount hand strap to DT430 Hold adjustable hand strap vertically. Insert the top buckle into DT430 top holder as illustrated. Gently push to align buckle with holder until a click is heard.
system tray to open soft keyboard. Tap “OK” to finish settings. If connection succeeds, system will show on the status field of Wireless Information screen. Tap to exit. In WLAN setting main panel, you can perform Advance Setting, IP Setting, DNS and WINS Setting, and viewing IP Info.
Bluetooth OFF Bluetooth turning on (Yellow) Bluetooth On (Blue) Connecting Receiving Select ON in “Bluetooth boot up default” option to enable Bluetooth automatically when turn on your device each time. Bluetooth settings Tap “Settings” tab in “Bluetooth Manager” page to set Bluetooth. Allow Connection from: you can select “All devices”...
option, your device will be searchable by nearby Bluetooth devices. Check the option “Allow Bluetooth Settings in User mode” and “Allow create/change of paired device in User mode”, all tabs (Main, Paired, Search, Settings, Services) in Bluetooth Manager will be shown; if only check “Allow Bluetooth Settings in User mode”, Main, Settings and Service tabs will be shown;...
& etc, please refer to DT430 User Guide. DT430 settings Screen rotation Two screen view modes are supported in DT430, you can change it as you like. Double-click “Screen Rotation” icon in “Control Panel”, select Portrait / Landscape (Right-handed), / Landscape (Left-handed).
Page 18
Please close all active applications / programs before proceeding to backup, it will ensure backup data the most-up-to-date snapshot of the system. In Control Panel, double-click System Backup icon to open System Backup page. Tap the pull down arrow to select backup type and corresponding options below, and then tap “Start”.