2-3-5. Procedure in detail for moving the panel
<How to set the panel from the stand>
The procedure is reverse to remove the panel from stand.
Regarding the detail procedure, please refer to previous pages.
The simple procedure is as follows.
1. Approach the panel
to the stand and set
the lower hook to
lower hole of stand.
Panel
2. After setting the lower
hook to the lower hole,
stand up the panel to
vertically.
Hole
3. After standing the
panel to vertically,
set the panel to
stand slowly.
(Insert the upper
hook to upper
notch.)
4. Finish