This shipment was packaged and delivered to the carrier with utmost care to ensure safe delivery of goods to you, our valued customer. In the event that you must transport your PD-5 to a different location or to the factory for repair service, you must package it for safe delivery.
Use caution when bringing the PD-5 from a cold environment into a warm environment. If moisture has accumulated due to a sudden change of temperature, wait (1) hour until moisture has completely dissipated before operating the PD-5. PD-5 Component Description...
3) Shut the door. The LCD will display “Ready Session = 0”. 4) Press the “Destroy” button. The PD-5 will destroy the media in the destruction chamber and return to the home position, ready to destroy the next piece of media.
Technical and Maintenance Maintenance: Manual for details Hard Drive Destruction The PD-5 is designed to destroy many different formats of hard drives including: laptop drives, standard 1” drives, and 1.5” drives. To destroy hard drives: 1) Press Power button. 2) Remove mounting hardware from hard drive that would cause the media door not to close.
Multiple Hard Drive Destruction The most efficient way of destroying hard drives is to destroy multiple hard drives at one time. The PD-5 is designed to destroy up to (8) laptop drives or up to (2) standard 1” drives at one time. The actual capacity of multiple hard drive destruction depends on the height and physical construction of each hard drive model.
SSD. 3) Close the door and press the “Destroy” button. The PD-5 and the SSD Destroyer will destroy the media and return to home position to be ready to destroy the next piece of media.
Note: Placing the Debris Tray under the front of the PD-5 will catch the debris as it falls from the two holes in the front of the destruction chamber. (See “Cleaning Tips” below).
Case: 23 lbs. (10.43 Kg) 82 lbs. (37.19 Kg) Shipping Weight PD-5: 18.0 in. (L) x 7.0 in. (W) x 14.5 in. (H) Physical Dimensions Case: 17 in. (W) x 24.5 in. (L) x22.5 in. (H) 24 in. (L) x 12 in. (W) x 20 in. (H)
Garner and shipment to factory with transportation charges prepaid. If a defect arises and a valid claim is received within the Warranty Period, at its option, Garner will either: (1) repair the Product, (2) exchange the Product, or (3) request that end-user replace defective parts with new or refurbished user-installable parts that Garner provides in fulfillment of its warranty obligations.
A non-shielded power cord may be used to Check input voltage before plug in. connect AC power to the system. Use only power cords approved by Garner Products Inc. Crush Hazard. Keep safety door closed Equipment weighs more than 40 lbs (18kg), during operation.