Download Print this page

Technical Data - AEG KH5G Original Instructions Manual

Hide thumbs Also See for KH5G:

Advertisement

TECHNICAL DATA

Rotary Hammer
Rated input voltage
Wattage
No-load speed
Speed under load max.
Rate of percussion under load max.
Impact energy per stroke according to EPTA-Procedure 05/2009, Drilling / Chiselling
Impact energy per stroke (pre 2009), Drilling / Chiselling
Drilling capacity in concrete
Tunnel bit in concrete, bricks and limestone
Core cutter in concrete, bricks and limestone
Chuck neck diameter
Weight according EPTA-Procedure 01/2003
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise
levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745.
Hammer-drilling into concrete:
Vibration emission value a
h, HD
Uncertainty K=
Chiselling:
Vibration emission value a
h, Cheq
Uncertainty K=
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for
different applications, with different accessories or poorly maintained, the vibration emission may differ. This may
signicantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total
working period. Identify additional safety measures to protect the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
8
8
KH5G
220-240V 50 Hz
1100W
450 min
-1
430 min
-1
3000 min
-1
7.5 / 7.5 J
9.0 / 9.0 J
40 mm (SDS-max)
65 mm (SDS-max)
105 mm (SDS-max)
66 mm
6.4 kg
93.0 dB (A)
104.0 dB (A)
16.8 m/s
2
1.5 m/s
2
16.7 m/s
2
1.5 m/s
2

Advertisement

loading