Advertisement
M7410A SMALL FLOATING LINEAR ACTUATORS – PRODUCT DATA
ORDERING INFORMATION
control
OS no.
type
M7410A1001
floating
M7410A1001-3M
floating
FUNCTION
The movement of the electric actuators is produced by a
screw spindle which is driven in both directions by a syn-
chronous motor through a set of gears. A magnetic clutch
limits the torque of the gear assembly and the driving force of
the actuators. The actuators are fixed to the valve body by
means of a coupling ring requiring no tools for mounting. The
actuators are maintenance-free and supplied completely with
a ready-to-wire connecting cable
MOUNTING POSITION
The actuator may be mounted only beside or above the valve.
Adjust the valve in the correct position before mounting the
actuator.
Fig. 2. Mounting positions
MOUNTING
Before the actuator is fixed to the valve, the adjustment cap
must be removed (see Fig. 3). Make sure that the actuator is
in the open position (factory-supplied position) before fixing
the actuator to the valve body.
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland by its Authorized Representative:
Automation and Control Solutions
Honeywell GmbH
Böblinger Strasse 17
71101 Schönaich, Germany
Phone:
(49) 7031 63701
Fax:
(49) 7031 637493
http://ecc.emea.honeywell.com
Subject to change without notice. Printed in Germany
EN0B-0634GE51 R0313
stem force
cable length
90 N
0.9 m
90 N
3.0 m
Fig. 3. Removing the protection cap
The actuator must be mounted by hand. Do not use tools or
additional force insofar as this may damage the actuator and
valve.
Fig. 4. Mounting the actuator
ELECTRICAL WIRING
COM
WHITE
GREEN
Fig. 5. Cable colors
BROWN
Advertisement
