Before Calling For Service; Specifications - Uspa UB-7035R Operating Instructions Manual

10

Before calling for service

Problem
Completely fail to work
Water does not spray
Water is leaking or dripping
Seat, water or air is not
enough warm
11

Specifications

Item UB-7035R
Standard power supply
Water Way of connection
supply
Water pressure
Spray for cleansing
Spray for bidet
Water capacity
Cleansing
Spray temperature
Heat capacity
Safety feature
Air temperature
Dry
Heater capacity
Safety feature
Seat temperature
Heated
Heater capacity
seat
Safety feature
Deodorization method
Circuit breaker
Length of power cord
(W)392x(L)520x(H)157mm
Dimensions
(W)392x(L)490x(H)157mm
(W)392x(L)504x(H)157mm
Weight
Possible cause
Is there a power cord outage?
Is the power cord unplugged?
Are you sitting on the seat correctly?
Is the water shutoff valve closed?
Is the strainer clogged?
Are the nozzles clogged?
Check if all hoses are tightened properly
Is the temperature set to OFF?
Is the appliance used in economy mode
during a cold weather?
UB-7235 UB-7220
220-240 V~ / 50/60 Hz, 1660-1975 W
Direct connection to tap water
Thermal switch, temperature fuse, Floating switch
Room temp ~60 °C (140 °F)
220-240 V~ / 280-333 W
Temperature fuse
Room temp ~40 °C (104 °F)
220-240 V~ / 55-65 W
Temperature fuse
Catalystic filter
Solution
Check for a power cord failure or a tripped breaker
Plug the power cord in properly
Sit on the seat completely
Open the shutoff valve
Clean the strainer
Clean the nozzles
If water is still leaking or dripping, contact your dealer
Reset the temperature
Release the economy function
UB-7215 UB-7000R
0.05 MPa ~ 0.74 MPa
Room temp ~40 °C (104 °F)
220-240 V~ / 1600-1900 W
None
Within 15mA 0.03 second
UB-7000
220-240 V~ / 50/60 Hz, 1605-1910 W
None
None
None
None
None
None
17