TX-37LZ800H
3 Chassis Board
3.1.
Chassis Installation
1. Put the chassis frame on the LCD and fix it with screws (No. 31~55).
2. Put the DG-pcb P-pcb on the chassis frame and fix them with screws (No. 1~21).
3. Insert the clampers to the chassis frame.
4. Insert the side AV bracket from the side position of the DG-pcb and fix it with a screw (No. 21).
5. Joint DG-pcb and H-pcb with 80PIN CONNECTOR.
Refer to the parts list to confirm the PCB No.
Clamper
TMM15481 (No.1~10) n = 10
TMME287 (No.11~12) n = 2
TMME047 (No.21~23) n = 3
16