Summary of Contents for TASKMASTER TOOLS TM-CUT85CU
Page 1
Model: TM-CUT85CU Instruction manual Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Phone: TASKMASTER TOOLS 800-776-9775 4730 Madison Road 513-533-6200 Cincinnati OH 45227 www.ilsco.com...
(see back cover). No part of the contents of this manual may be reproduced, transmitted or circulated in any form or by any means without the prior written authorization of TASKMASTER TOOLS.
TM-CUT85CU WARRANTY AND SERVICING TASKMASTER PRO 5-Year Tool Service Protection Program Introducing the industry’s best service & support program for all your ILSCO hydraulic crimping and cutting tools. All ILSCO tool buyers are automatically registered in the TASKMASTER PRO Service Protection Program and will receive free tool repairs for defects in material or workmanship on their tool(s) for five years after their original purchase date.
TM-CUT85CU SAFETY Read all safety warnings, instructions provided with this tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. WORK AREA SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
TM-CUT85CU TECHNICAL SPECIFICATIONS Force developed: 7.8 tons Jaw Opening: 3.34 in. Hydraulic oil: Shell Tellus S2 V 15 Dimensions: 27.4 in. x 2.5 in. x 8 in. (L x W x H) Weight: 16.1 lbs. Cut Capacity CU conductor: 3.3 in.
TM-CUT85CU OPERATING INSTRUCTIONS Be sure to read instructions carefully, wear safety goggles, and keep fingers away from cutting head. ADVANCING & RETRACTING To advance the tool, lift and lower the pump handle. To retract the tool, twist pump handle completely, then push handles together until blade is fully retracted.
Page 8
TM-CUT85CU Make sure all cuts are made perpendicular to the cutting head or damage will occur to blades. Advance the blade by lifting and lowering the pump handle. Once cutting cycle is complete, twist pump handle then push handles together until blade is fully retracted.
Page 9
TM-CUT85CU TOOL MAINTENANCE Daily maintenance: • After each cutting cycle wipe the cutting head jaws free of metal shavings. • Wipe down all steel parts with WD-40. • Store the tool in a non-humid environment. The tool should provide many years of service when given the proper maintenance and care.
TM-CUT85CU HEAD ASSEMBLY BREAKDOWN AND PARTS LIST Part # Part Description Part # Part Description 706097 FIT SCREW 13 706103 SUPPORTING ROLL 706095 PRESSURE PIN 14 705806 FILTER DISC 101809 ROLL PIN 15 706091 CYLINDER HEAD 706001 COMPRESSION SPRING 1...