Advertisement
Find the brand of your set in
www.jollyline.it/cf.html
Auto Program
Turn on your device.
Press the appropriate button for the device you
wish to work on (
briefly.
Keep holding both buttons
stays lit; release the buttons. FIG.3
Press the 0 button followed by the type of device
selected (1 for TV, 4 for Pay TV), the LED will flash
every 3 seconds approximately. FIG.5
When the device turns off press any button on the
keypad; the LED will flash twice as confirmation.
Check that everything is working properly, if all
functions are not present, repeat
the Auto Program process.
o
); the LED will flash
PAY
TV
and
until the LED
Advertisement
