Summary of Contents for Widex iP5
- Page 1 Fine Tuning Guide for Programming the Inteo with the iP5 Portable Programmer 1-800-221-0188 www.widexPro.com...
- Page 2 Compass the Master program has been moved to a position other than the first position the iP5 will return it to the first position. The iP5 programmer will always ask if you want to over- write, or recalculate, the settings according to the format that the iP5 programmer can handle.
- Page 3 • Press [TONE KEY] (see C) to activate tone. when the iP5 pro g rammer is turned on and a pro g rammed Inteo is recognized. You can re t u r n to the Pre c o n d i t i o n s, Sensogram or Feedback mode at any time by pressing the mode button.
- Page 4 • Press the [UP ARROW] under the desired channel to increase the value. This will increase gain for inputs above a conversational level. 1. Turn on iP5: Press [on R] for right or [on L] for left (See A). • Press the [DOWN ARROW] under the desired channel to decrease the value. This will decrease gain for inputs above conversational level.
- Page 5 The dispenser has the flexibility of placing programs 2 through 5 in their preferred order. i n c re ases compression for the very low fre- The Master program is always in the first program position when programming with the iP5 q u e n cy channels. It further allows for man- programmer.
- Page 6 3 . O ve rall gain may be adjusted, in one dB steps for each acoustic listening pro g ram other than the primary Master Pro g ram and the Audibility Extender, in the [P ROGRAM GAIN OFFS E T] mode. Note: [PGO] can only be accessed if additional listening programs have been selected.
- Page 7 Press [ON R] AND [ON L] simultaneously. Cancelling mode will be displaye d . Note: If the iP5 is inactive for more than 5 minutes it will shut off automatically. d ) P ress the [UP ARROW] or [D OWN ARROW] under the desired listening pro g ra m to change the Feedback Cancelling setting.
- Page 8 The Test Mode allows the clinician to compare the output of the hearing aid against factory specifications. The hearing aid is set to a fixed frequency gain setting during this measurement. 1. Turn off the iP5 by pressing [ON R] AND [ON L] simultaneously.
Need help?
Do you have a question about the iP5 and is the answer not in the manual?
Questions and answers