Air Flow Settings (Xcell 400 Qvi Model Only); Factory Speed Settings (All Xcell 400 Models); Technical Data - Xpelair Xcell 400 QV Installation And Operating Instructions Manual

6.3 Air flow settings (Xcell 400 QVI model only)

Air flow rates can be changed by a qualified service technician using the control panel shown below. The supply air
Fan speed can be modified independently from the exhaust air Fan speed, between 150-400 m³/h in the „Customer
Settings‟ menu. See the Service Manual for further details.

6.4 Factory speed settings (All Xcell 400 models)

Speed 1: 150 m³/h - Low speed - preferably at night or during periods of absence
Speed 2: 240 m³/h - Normal daytime operation
Speed 3: 400 m³/h - Boost setting for increased air exchange
Note:
When the MVHR is being used with a Manual 2-Speed Switch (Xcell 400 QV model only); only speeds 2 and 3 will
apply.

6.5 Technical data

Voltage / Frequency
Max. current consumption
Power consumption - Speeds 1, 2, 3
Air flow rate - Speeds 1, 2, 3
Air flow rate at 100 Pa Static Pressure
Protection category
Max. ambient temperature
Dimensions (without ducting) - W x H x D
Weight of MVHR
Duct connections
Condensate drain tube connections
Filter class
Efficiency of Heat Exchanger
Sound pressure level (measured at a distance of 3m) - Speeds 1, 2, 3
13
Technical data Units Specification
V / Hz ~ 220-240V / 50-60 Hz
A 2.0
W 35/85/190
m³/h 150/250/350
m³/h 410
IP 20
°C 50
mm 750 x 725 x 469
Kg 34
mm
150
mm
20
- G4
% Up to 91%
dB (A)
29/34/44