rauland 2524 ChronoCom Operation Manual

RAULAND-BORG CORPORATION
The Two Functional Modes
As
its name signifies, the ChronoCom unit an perform
two distinct functions: chronometric (clock) and commu-
nications. Its master-clock functions Include keeping
time, controlling different events (e.g.,
and equipment on and off), and correcting
ing lights
secondary clocks. Its communiations functions Include
showing all-ins from associated room stations; using its
dial pad for calling rooms, paging,
program source; checking
faults; and monitoring room stations.
Variations in
Which operations a given 2524 will run depends In part
upon what other equipment is In the system. The most
obvious example is the "Comm" mode, which requires
such items as a Director Intercom control panel, speaker
relay panels, and room speakers. As you go through this
manual, you may find it helpful to place a check mark next
to the operations that apply to your system,
out those that do not apply.
Variations in Programming
The other major factor that determines which opera-
tions the 2524 will run is the programming. For ample,
the 2524 will not even enter the "Comm" mode unless
that has been enabled. See the programming manual,
KI-1629, for complete information.
Changing Run Modes
When the 2524 is in the Clock Run
LED remains lit and its displays show the time of day, any
Run-Mode Displays
While the 2524
is in
panel windows and LEDs will display the following infor-
mation:
window will show
the 12-hour mode).
"Zone/Output " LED will
corresponding output is active for an "event" (time
tones, music during a class change,
CORPORATION .
2524
3450 West Oakton Street, Skokie. Illinois
l
General Information
ringing bells, turn-
and distributing a
the room-station wiring for
Equipment
or to cross
Mode, the "Clock"
the Clock Run Mode, its front-
the current time.
light whenever its
running equip-
Printed in U.S.A
ChronoCom Master Clock and
Intercom Controller
Operation
event-zone activities, the day of the week, and the current
schedule. In the "Comm" Run Mode, only
LED will be lit; the "Station" window will be dark
displaying the number of a room that Is
it is
in communication with the system opentor.
is
soon as it detects a all-in or its numerical keys are
As
used to dial a mom, the 2524 automatically switches from
the Clock Run Mode to the "Comm" Run
suchcommunications have ended, the 2524 automatically
switches back to the Clock Run
Exception:
the Clock Run
will not return to the "Comm" Run Mode
it back manually. The
all-ins with
a
them from the 2524 until you switch it back to the
"Comm" Run
Because the
"Comm" Mode
you should not normally switch modes manually. How-
ever, you will have to switch to the "Comm" mode before
you an begin certain "Comm" functions (and to the clock
mode for its functions).
Press Clock/Comm to toggle the operation modes.
* The "Clock" or
the 2524 is currently in, and the display will
mode
change, as described in the introduction to this
subsection.
Clock Mode
ment). paging, or clock-correction activities.
The appropriate "Days" LED will be lit.
The "Sched" (Schedule) window will show which
schedule is currently running.
The "Music" LED will light if a music event is run-
ning.
The "Clock" LED will be lit.
Show the Date
To display the date on rhc front panel, hold in Enter.
" The "Time" window will show the month and day.
Releasing Enter will return the normal display.
60076-2951
Automatic Switching
Mode.
manually switch from the 'Comm" to
If you
while a all-in Is displayed, the 2524
Mode
2524 will continue to
"beep," but you will not be able to answer
Mode.
Manual Switching
2524 displays little Information i n the
and automatically switches to it for all-ins.
LED will
"Comm"
KI-1630
(708) 6794900
l
the "Comm"
unless
calling in or
Mode. When all
until you switch
signal waiting
light to show which
1 of 5
Page