Summary of Contents for Xeline MM-202BX
- Page 1 MM-202BX Installation Manual PLC Master Unit Plug into the future Powerline Communication by Xeline Xeline Co., Ltd.
- Page 2 MM-202BX Installation Manual ATTENTION This equipment conforms with the following CE standard(s): (1) EN55022 (2) EN60950-1 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 3: Table Of Contents
4.1 Connecting the Power ············································································10 4.2 Configuring the MM-202BX ·······································································10 4.3 Connecting the CU-100A to the MM-202BX ·····················································10 4.4 Connecting the MM-202BX to the ISP Backbone ···············································11 4.5 Checking the Final Connections ·································································11 4.6 Resetting to Factory Default Mode ······························································12 5. - Page 4 Figure 4 MM-202BX Top View ..............8 Figure 5 MM-202BX Bottom View.............. 9 Figure 6 Connecting the MM-202BX to the CU-100A ........10 Figure 7 Connecting the MM-202BX to the ISP backbone .........11 This document is subject to change without prior notice.
-
Page 5: Introduction
Xeline’s PLC system offers a cost-effective and easy-to-install Internet access solution from any electrical outlet. Xeline's XPAS-200B PLC Internet Access System supports data rates of up to 24Mbps and is targeted for effective Internet access over powerlines in residential houses or high-rise building configurations. -
Page 6: Before Installing The Mm-202Bx
(2) Convenient access to the local backbone network (3) Sufficient space to install the MM-202BX and CU-100A (PLC Coupler) Note: In indoor configurations, one of the optimal locations for the MM-202BX is near the distribution station. (4) 1 Laptop PC 1 (5) RJ-45 direct cable (Core manufactured by: E-Tech Electronics Co., Ltd. -
Page 7: Guidelines For Installation
(3) Never install MM-202BX on a wall made of materials such as aged and rusted wood, etc. (4) Use silicon compound to fix firmly when it is difficult to use only clamp screws when fixing the MM-202BX on the inner wall of the distribution panel. -
Page 8: Getting To Know The Mm-202Bx
3. Getting to Know the MM-202BX 3.1 Front View Figure 2 MM-202BX Front View UPLINK Activates when the MM-202BX’s UPLINK port is connected to the Backbone. Blinks during data transmission between the MM-202BX and backbone. ACT1 (PCS) Blinks when PLC signals are detected. -
Page 9: Bottom View
MM-202BX Installation Manual 3.3 Bottom View Figure 4 MM-202BX Bottom View Power Switch Switch for turning power ON/OFF AC Inlet For connection to power cable. 3.4 Product Specifications Specifications Remarks Data rates Up to 24Mbps Interface RJ-45 Ethernet 2 port... -
Page 10: Installing The Mm-202Bx
RJ-11 cable to connect the MM-202BX and CU-100A. The RJ-11 cable is not included with the MM-202BX ① Insert one end of the RJ-11 cable in the SIG1 or SIG2 port of the MM-202BX. ② Insert the other end of the cable in the INPUT port of the CU-100A. -
Page 11: Connecting The Mm-202Bx To The Isp Backbone
Switch Hub in advance for installation. ① Check the connection between the backbone and Switch Hub. ② Connect the UPLINK port of the MM-202BX to the Switch Hub using the RJ-45 cable. MM-202BX Figure 6 Connecting the MM-202BX to the ISP backbone ③... -
Page 12: Resetting To Factory Default Mode
Confirm if the Internet connection is working properly. ⑬ 4.6 Resetting to Factory Default Mode Use the reset button at the top side of the MM-202BX in order to reset the configuration into factory default mode. ① Turn off the power of the MM-202BX. -
Page 13: Trouble Shooting
Reset the SU-200BX to the factory default mode and download the configuration again. If the problem is still not solved, please contact Xeline’s Technical Support Center. This document is subject to change without prior notice. -
Page 14: Appendix
Information in this document is subject to change without notice. No part of this document may be reproduced or altered in any form or by any means, electronical or mechanical, for any purpose, without the express written permission of Xeline Co., Ltd. l Xeline Technical Support Center Address: 5F.