Adjusting The Date And Time; Setting The Self-Timer Delay Time - Konica Minolta Dimage G500 Instruction Manual

Using the Set-up Menu (Cont'd)

Adjusting the Date and Time

- If the battery is removed for approximately 24 hours or more, the
date and time settings will be lost. In this case, please reset the
date and time.
1

Setting the Self-timer Delay Time

- You can change the length of time the self-timer delays before
shooting from 10 seconds (default) to 3 seconds.
- The self-timer mode for a 10-second delay (default setting) will be
cancelled after a picture is taken. However, if you set the self-timer
for a 3-second delay, the setting is effective even after shooting so
that you can continue to take a pictures using the self-timer.
1
1. Select "DATE SET", press right and
the date and time settings screen
appears.
See Steps 3 to 6 on pages 27 and
28 about how to make the settings.
• Once settings are completed, you will
return to the set-up menu.
1. Select "SELF TIMER", press right
and the settings screen appears.
Using up or down, select "3 sec"
and press either right or the
MENU/SET button. The setting is
completed and you return to the
set-up menu.
• If you press left, the setting is invalidated
and you return to the set-up menu.
103