This machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. Diamatic BV offers a course on the use of the machine in order to make the operating and maintenance personnel familiar with all elements of the machine.
The BDC-SLURRY PRO produces up to 200 CFM, strong enough to leave the floor clean of slurry in one pass. The BDC-SLURRY PRO will speed up production by having an easier and more reliable way to remove slurry off of a concrete surface.
If the length of the brushes is, due to wear, less than 5mm or they are extremely deformed, the brushes have to be replaced. Check the Service Manual for the order numbers. g) All repair work has to be done by qualified Diamatic personnel, this guarantees a safe and reliable machine. The part numbers can be found in the Service Manual.
Be aware of your surroundings and machine operating level. Do not side hill, do not run on steep incline, this could cause machine to tip over. The weight of the BDC-SLURRY PRO is 346 lbs. Use a crane or lift when transporting the machine, use the lifting eyes of the machine.
Page 33
2 years from the date of delivery or, in the case of Rental Fleet Machines, 180 days from the date of assignment to a Rental Fleet. Diamatic makes this warranty only to the buyer who purchases the products directly from Diamatic or its authorized distributor.
Page 34
Diamatic for the replacement parts before they can be shipped. Once the evaluation process is complete and parts are deemed a valid warranty claim, a credit will be issued against this invoice.
Page 35
TO THE DELIVERING DISTRIBUTOR OR END USER To ensure the proper warranty coverage is extended to the owner of this machine, fill out the attached card COMPLETELY and ACCURATELY and return to Diamatic. The warranty period will start on the delivery date entered below.
Need help?
Do you have a question about the BDC-SLURRY PRO and is the answer not in the manual?
Questions and answers