Table of Contents
Advertisement
錯誤! 使用 [常用] 索引標籤將 标题 1 套用到您想要在此處顯示的文字。
Charge the battery
The accompanying Li battery can be used after being unpacked. To make
the battery always in its best condition, please exhaust the capacity of the
battery and then fully recharge it for the first three times.
Connect the charger with the mobile phone through
1.
the charging interface, and insert the charger to
100V/240V power socket.
When the phone is powered on, the capacity indicator
2.
on up-right corner of the screen keeps scrolling during
charging; when the phone is powered off, there‟ll be charging indication
on the screen during charging. If the phone is used excessively without
enough capability, the charging indicator will not immediately appear on
the screen of the phone when charging starts, and the phone might not
be powered on within a few minutes.
When the phone is on, the battery is fully charged as the capacity
3.
indicator on the up-right corner of the screen is full and doesn‟t flicker
any longer. When the phone is off, the battery is fully charged as there
is fully charging indication. During the charging, the phone and charger
may normally become hot.
Please disconnect the charger from your mobile phone and the socket
4.
when the charging is completed.
15
Advertisement
Table of Contents
