Connecting To An Antenna Or Cable; Other Connections; Connections (Notifications) - LG 32LJ500B Easy Setup Manual

32LJ500B
32LJ501B
Model
32LJ500D
32LJ501D
VESA (A x B) 100 x 100
Standard
M4
screw
Number of
4
screws
Wall mount
bracket
LSW140B
(optional)
B
• Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
• Screw length from outer surface of back
cover should be under 8 mm. (For 28LJ400B,
28MT42VF)
Wall mount Pad
Wall mount Pad
Back Cover
Standard screw
: M4 x L10

Connections (Notifications)

You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
more information on external device's connection,
refer to the manual provided with each device.
• If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information about recording, refer to
the manual provided with the connected device.
43LJ5000 28LJ400B
43LJ500T 28MT42VF
200 x 200 100 x 100
M6 M4
4 4
LSW240B
RW120
MSW240
A
Back Cover
Max. 8 mm
• The external device connections shown may
differ slightly from illustrations in a manual.
• Connect external devices to the TV regardless
about the order of the TV port.
• If you connect a gaming device to the TV, use the
cable supplied with the gaming device.
• Refer to the external equipment's manual for
operating instructions.

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is
optional.
• Make sure not to bend the copper wire of the RF
cable.
Copper wire
• Complete all connections between devices, and
then connect the power cord to the power outlet
to prevent damage to your TV.
• To improve the picture quality in a poor signal
area, purchase a signal amplifier.
• Use a signal splitter to use 2 TVs or more.
• If the antenna is not installed properly, contact
your dealer for assistance.
• DTV Audio Supported Codec: MPEG, Dolby
Digital / Dolby Digital Plus (32 kHz / 44.1 kHz /
48 kHz)

Other Connections

Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and the TV with the HDMI cable.
• HDMI Audio Supported Format:
AC-3 (Max bit rate : 640 Kbps),
PCM (32 kHz / 44.1 kHz / 48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz /
44.1 kHz / 48 kHz)
(Depending upon model)
7