Summary of Contents for Ace Tele-ECG
- Page 1 Tele-ECG Accurate, Connected, Easy. USER MANUAL technology by a product by Sanjee Proudly Made In India ElectroMedicals...
-
Page 2: Table Of Contents
Safety Regula ons Electrical Safety & Shock Ground Protec on Environmental Condi ons Cleaning Usage Cau on 3. System Configura on ..5 Tele-ECG Configura on Tele-ECG Machine Electrode Placement Applica on For Mobile Applica on For Laptop Sanjee Accurate, Connected, Easy. www.sanjeevanielectromedicals.com... -
Page 3: Introduc On
Objec ve This user manual is intended to acquaint and assist the user with Sanjeevani's ACE, a Tele-ECG system. User instruc ons, warning and cau on no ces may carefully be noted for safe and effec ve opera on of the unit. -
Page 4: Safety
SANJEEVANI's ACE is ba ery operated. It does not lead to any harm or discomfort to subject/pa ent. It has all the safety features provided by IEC60601-1 Operator should however make sure that the ba ery charger is disconnected from the mains before using the ACE on the subject/pa ent. -
Page 5: Electrical Safety & Shock
USER MANUAL The manufacturer and installa on personnel disclaim any responsibility on the opera on in the following cases: Ÿ ·Spare parts have not been replaced with original spare parts like Ba ery, Charger & ECG Cable. Ÿ ·The equipment is not used according to the safety regula ons. 2.2 Electrical Safety &... -
Page 6: Cleaning
Ÿ To sterilize the surfaces, aldehyde-based solu ons mixed with water are recommended. 2.6 Usage Cau on Ÿ Ensure that your android mobile/laptop is connected to the right Ÿ ACE device by verifying the Serial No. Sanjee Accurate, Connected, Easy. www.sanjeevanielectromedicals.com ElectroMedicals... -
Page 7: System Configura On
USER MANUAL System Configura on Tele-ECG Configura on Tele-ECG machine can be interfaced with the applica on so ware installed on Mobile (android)/Laptop via Bluetooth. Tele-ECG Machine Charging Indicator (LED) Power Button ON/OFF Indicator Bluetooth Indicator (LED) (RED LED) Battery Charging... - Page 8 USER MANUAL Refer Fig. (a), (b) & (c): 1. Bluetooth Indicator (LED) - Starts blinking once it is ready to connect and turns OFF once it gets connected. 2. Charging Indicator (LED) - Turns Red while charging & turns Green when charged fully. 3.
-
Page 9: Electrode Placement
USER MANUAL 3.3 Electrode Placement 12 lead ECG is recorded by placing 10 electrodes, comprising 6 chest electrodes and 4 limb electrodes as shown in following figure. Six chest electrodes are numbered as V1 to V6. They are posi oned in specific posi ons on the rib cage. -
Page 10: Applica On For Mobile
USER MANUAL 3.4 Applica on For Mobile STEP 1: Press & Hold the Power Bu on of the Tele-ECG Device ll the ON/OFF LED turns Green & Bluetooth LED starts blinking at constant rate. STEP 2: Click on ACE Tele-ECG app in your mobile to get the following page. - Page 11 USER MANUAL STEP 3: A er clicking on New, the applica on will ask for Bluetooth Connec vity. 12CH. TELE ECG wants to turn on Bluetooth. Deny STEP 4: Once the device gets connected via Bluetooth (verify serial number of the device), the Sanjee Accurate, Connected, Easy.
- Page 12 USER MANUAL STEP 5: Click on the OPTION to get the following options. Mode: Two Modes are available, ECG & Test mode. Select ECG mode to take new ECG OR Test mode to check proper func oning of device. Filter: Adjust the filter frequency range if required (By default it is set to 0- 150 Hz).
- Page 13 USER MANUAL STEP 6: A er selec ng the Mode, Filter & Gain, click on START to get the following screen (Test & ECG respec vely). You can stop acquisi on a er 13 seconds by clicking STOP. STEP 7: Select Generate Report by clicking on OPTION.
- Page 14 USER MANUAL STEP 8: Proceed to Save the ECG Report by following the steps Save Data as... ECG Report can be saved in Image/PDF/Text IMAGE DATA IN TEXT FILE You can protect the Report with password. Do you want to set password to pdf file? Fill in the Pa ent Details &...
-
Page 15: Applica On For Laptop
(Upto 155 characters) Insert Comment if required. View Report? Click Yes to view Report. 3.5 Applica on For Laptop STEP 1. Turn on Bluetooth, Add ACE Tele-ECG & Pair it. ( Click on START Se ngs Devices Turn on Bluetooth... - Page 16 USER MANUAL USER MANUAL STEP 2. Check the ports from Device Manager. (Click on START Type Device Manager in search box Ports ) Sanjee Accurate, Connected, Easy. www.sanjeevanielectromedicals.com ElectroMedicals...
- Page 17 USER MANUAL STEP 7. Fill in Pa ent Details, adjust the system se ng accordingly and click SAVE. STEP 8. Lead Status will indicate if any of the lead is connected/not connected. Red Indicates lead not connected (reconnect the lead and proceed further) & Green indicates lead connected.
- Page 18 USER MANUAL USER MANUAL USER MANUAL USER MANUAL STEP 3. Open Tele-ECG App on Laptop. STEP 4. Insert the port no. and connect. STEP 5. Instrument connected successfully (Ensure that the Bluetooth Red LED turns OFF in Tele ECG device, else try with another port no.) STEP 6.
- Page 19 USER MANUAL STEP 9. Click on START. STEP 10. Click on STOP & then on REPORT (Minimum ACQ Time to generate Report is 13s) STEP 11. Print/Save ECG Report. STEP 12. You can send this report to the expert by E-mail or WhatsApp or any other...
- Page 20 Sanjee Warranty does not apply for, 1. For any accessories other than the device 2. Use of parts/accesories not provided or supported by ACE TELE-ECG. 3. Damage resul ng from accidental,mishandling or negligence on part of the ElectroMedicals user and incorrect line voltage.