Bananza BH-40 Installation, Operation & Service Manual page 68

Installation Code and Annual Inspections:
®
All installation and service of BANANZA equipment must be performed by a contractor qualified in the installation and service of equipment sold and supplied by Bananza and conform to all
®
requirements set forth in the BANANZA manuals and all applicable governmental authorities pertaining to the installation, service and operation of the equipment. To help facilitate optimum
performance and safety, Bananza recommends that a qualified contractor conduct, at a minimum, annual inspections of your BANANZA
only replacement parts sold and supplied by Bananza.
Further Information: Applications, engineering and detailed guidance on systems design, installation and equipment performance is available through BANANZA
Please contact us for any further information you may require, including the Installation, Operation and Service Manual.
This product is not for residential use.
© 2009 Roberts-Gordon LLC All rights reserved. No part of this work covered by the copyrights herein may be reproduced or copied in any form or by any means – graphic, electronic, or mechanical, including photocopying,
recording, taping, or information storage and retrieval systems – without written permission of Roberts-Gordon LLC.
www.bananza.com
Keep all flammable objects, liquids and vapors the minimum
required clearances to combustibles away from heater.
Some objects will catch fire or explode when placed close to
heater.
Failure to follow these instructions can result in death, injury
or property damage.
Printed in U.S.A.
Fire Hazard
®
equipment and perform service where necessary, using
®
representatives.
P/N 91037921 Rev. B