Kitsound COMET User Manual page 2

Please read this manual carefully before use.
Box contents
KS Comet earbuds
•
USB charge cable
•
S/M/L silicone earbuds
•
Carry case
•
User manual
•
Functions
1. Microphone
2. Micro USB charging port
3. LED indicator
4. Multi-function Button (MFB)
2
4 3 1 1
Instructions for use
Charging the battery
1. Connect the micro USB end of the charging cable to the Micro USB charging port (2) and the
standard USB end to a PC USB port or USB mains charger
2. The LED indicator (3) will be red whilst charging. It will turn blue after around 1 hour. The battery is
now fully charged
3. If the LED indicator (3) flashes three times every 20 seconds, it means the battery is running low.
Once this happens, you have about 5-10 minutes of use before the earbuds power off automatically
Pairing the left and right channels
1. Start by holding down the MFB (4) on both earbuds at the same time for up to 10 seconds; you will
hear an audible cue saying 'Power On' and both earbuds will flash red and blue. Release the MFB (4)
when this happens
2. Once connected you will hear a single beep on the left channel and a single beep on the right
channel. Another cue will be heard stating 'Connected' and then 'Left Channel' and 'Right Channel'
confirmation checks will be performed
3