Pencam MT4032 User Manual

PENCAM
Live Recording in Every Situation
ON/OFF
Camera
Microphone
USB Port
Card slot
Indicator
Reset button
Introduction
MT4032 is a cutting-edge camera built-in a pen. You can
take pictures, save video fi les with sound, use it as a we-
bcam in Skype. Files are stored on microSD fl ashcard, you
can download them directly from fl ashcard or through
pen connected by USB cable.
Note! Before fi rst use fully charge the device.
Charging
Unscrew the pen in half of its length. Use included USB
cable to plug it to USB port in PC computer. During charg-
ing red LED is blinking, when fully charged red LED is on
constantly. After charging unplug USB cable and screw
together both parts.
Installing microSD card
Unscrew the pen in half of its length. Put microSD into card
slot, note that fl ashcard connection pins should facing
mini USB port. Now screw together both parts.
Using pen
To make notes twist on silver ending of pen, after use twist
off to hide pen inside.
Switching modes
Press and hold ON/OFF button for about 2 sec, green LED
indicator will be on constantly. Device is now in snapshot
mode.
Next press and hold ON/OFF button for about 2 sec, green
LED indicator will blink 3 times. Device is now in video
mode and will record video fi le instantly.
Next press and hold ON/OFF button for about 2 sec, green
LED indicator will blink once and go off . Device is now in
off mode.
Note! If no action is taken within 30 sec from switching
mode the device will automatically go to off mode.
Taking pictures
When device is in snapshot mode press shortly ON/OFF
button. Every time you press it the device is saving picture
on microSD card.
Recording video
When you have switched from snapshot mode to video
mode the device will record video instantly. To stop record
press shortly ON/OFF button. To start recording next video
fi le press again ON/OFF button - green LED indicator will
blink 3 times to confi rm recording next fi le.
Connecting to PC computer
Data storage mode
When MT4032 is in off mode unscrew the pen and con-
nect it to the PC computer using USB cable included in
package. System will automatically install the device as an
USB mass storage device. You can copy all fi les from pen to
windows desktop. During data transfer green LED indica-
tor is blinking.
Webcam mode
Webcam mode
Turn MT4032 into on mode and plugged to PC using USB
Insert software disk into CD-ROM drive and run driver in-
cable. Windows will install new capture video device. In
stallation. When fi nished turn MT4032 into on mode and
webcam mode only video is enabled, microphone func-
plugged to PC using USB cable. Windows will install new
tion is disabled – use external input audio device for skype
capture video device. In webcam mode only video is ena-
calls. bled, microphone function is disabled – use external input
audio device for skype calls.
Setting data and time
Setting data and time
Install microSD card into device and plug it to PC com-
To set actual date and time you need to copy fi le "time.txt"
puter via USB cable. When device is set to "data storage"
to root folder of MT4032 in data storage mode. Copy "time.
mode you will fi nd "time.txt" fi le in the root folder. Use
txt" from software disc to desktop and edit in windows
Windows notepad to edit this fi le and enter valid date and
notepad. File contains only one line as below:
time. Save fi le, unplug USB cable and wait 1 min. Now
2009.01.01 12:01:01
power on device again – new date and time settings will
Modify this line to actual date and time, save it, and then
be stored.
copy into root folder of MT4032 in data storage mode.
Reset
Next unplug USB cable and wait until LED indicator goes
If you encounter strange behavior of the device you can
off . Now turn on MT4032 – new time settings will be ap-
put straighten paper clip into "reset hole" to restart the
plied.
device.
Reset
Note! If there is no available space for recording red
If you encounter strange behavior of the device you can
and green LED indicator will fl ash at the same time.
put straighten paper clip into "reset hole" to restart the
After 5 sec device will stop recording and switch into
device.
off mode.
Note! If there is no available space for recording red
Note! If red and green LED indicator is blinking alter-
and green LED indicator will fl ash at the same time.
natively – you need to recharge the device. After 5 sec
After 5 sec device will stop recording and switch into
device will stop recording and switch into off mode.
off mode.
Note! If red and green LED indicator is blinking alter-
natively – you need to recharge the device. After 5 sec
device will stop recording and switch into off mode.
MT4032
User's manual
EN