Power-On And Reset; Button Function - Konig KN-CP40 Manual

1. Features:
1. Four buttons: SET, COMPASS,
HISTORY, ALTI
2. Hour, minute, second display
3. 12/24 hour selectable
4. °C/°F selectable
5. Weather forecast for 4 states:
sunny, semi-sunny, cloudy, rainy
6. Indoor temperature range
(-10°C~50°C), sampling cycle:
30 seconds
7. Compass function
8. Altimeter function
9. Height unit: M/Feet selectable
10. Air pressure history record
11. Air pressure unit: hpa/mmHg/
inHg selectable

2. Power-On And Reset

When Power-On or reset, LCD full display for 3 seconds  LED light on
for 3 seconds Normal mode

3. Button Function:

Function
Operation
Standard Press Check date
mode
Hold Enter setting
mode
Set mode Press Confirm
setting
Hold ―
3.1. Normal Mode Set
1. Press "SET" to toggle between time and date.
2. Hold "SET" for 2 seconds to enter setting mode.
3. Hold "SET" for 12 seconds to power off, press any button to power on.
4. When displaying altitude, press "HIST" to check height history record.
5. When displaying barometer, press "HIST" to check air pressure history
record.
6. Press "COMPASS" to enter compass mode.
7. Hold "COMPASS" to enter compass checkout mode.
8. Press "ALTI" to switch display altitude height.
9. Hold "ALTI" to test absolute height.
10. While holding "SET", again hold "COMPASS" to enter magnetism
deflection angle setting.
11. LED light will come on if any button is pushed.
ENGLISH
SET HIST
Check history
record
―
Exit setting
mode
2
COMPASS ALTI
Enter Altitude height
compass mode
mode
Enter Test absolute
checkout height
mode
One step One step
forward forward
8 steps/ 8 steps/
seconds seconds
forward forward