Advertisement
stEp 5
5
© The Dezac Group
Use the + and - buttons to set the
power level.
Important: Do NOT exceed the
maximum power level for your skin
type.
© The Dezac Group
stEp 6
6
Press the enable button once. The
power level button(s) selected will fully
illuminate and the orange light on the
wand will illuminate.
Note: Each time the power setting is
adjusted, you will need to press the
© The Dezac Group
enable button to continue.
I N S T R UC T IO N S F O R U S E
I N S T R UC T IO N S F O R U S E
9
stEp 7
7
Place the wand over the hair you wish
to treat. Ensure both skin sensors are
in contact with the skin (you may need
to apply gentle pressure).
The white 'ready' light will illuminate.
stEp 8
8
HALF press the treatment button on the
wand.
A red guide light will appear.
you can move the wand while
maintaining contact with the skin to
target around where the hair meets
the skin. Ensure both skin sensors do
remain in contact with the skin.
SALON LASER TWEEZER
™
Advertisement
