Microfilter (Not Shown In Cbs); Front Brakes; Rear Brakes; Vehicle Check - BMW X5 M 2013 Service And Warranty Information

Microfilter (not shown in CBS)

Maintenance work:
Replace ventilation microfilter every 2 years
based on the vehicle production date, or in
connection with scheduled brake fluid change.

Front brakes

Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness,
replace as necessary.

Rear brakes

Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness,
replace as necessary.
Parking brake: Check function, condition and
the brake shoe linings thickness, replace as
necessary. Parking brake shoes/linings are
excluded from coverage under the BMW
Maintenance Program.

Vehicle check

Maintenance work:
Check operation of horn, headlight flasher and
hazard warning flashers.
Check instrument and control lighting and
heater/air-conditioning blower.
Check lighting system: turn signals, back-up,
license plate, interior (incl. map, reading
lights), glovebox, luggage area lights.
Safety belts: Check condition and function.
Check windshield wipers and washer jet
positions.
Tires: Check tread depth, wear pattern, outer
condition, inflation pressure (also optional
spare tire, if equipped). If necessary, correct
pressure.
Reset Tire Pressure Monitor.
Battery: Check state of charge (magic eye) and
charge if required.
Power steering reservoir: Check fluid level.
Visually inspect all SRS airbag units for torn
covers, obvious damage or attachment of
stickers.
Rear-view mirrors, optional rear-view camera.
Coolant: Check fluid level and concentration.
Windshield washer and intensive cleaning
system: Check protection level, fluid level, top
if necessary.
Brake system connections and lines: Check
for leaks, damage and correct positioning.
Underbody, incl. all visible parts (i.e.,
transmission, rear axle, fuel lines, exhaust
system): Check for damage, leaks and
corrosion.
Steering components: Check for clearance,
leaks, damage and wear.
Final Inspection: Road test with check of:
– Brakes
– Steering
– Shock absorbers (visual)
– Transmission

Brake fluid

Maintenance work:
Replace brake fluid.
Spark plugs (connected to specific
Engine Oil Service)
Maintenance work:
Replace spark plugs at every 2nd Engine Oil
Service (approximately 30,000 miles).
8