Do you have a question about the 1500#00-A Series and is the answer not in the manual?
Questions and answers
Summary of Contents for HORI 1500#00-A Series
Page 1
User's 's 's 's Manual User Manual User User Manual Manual P P P P reparation day reparation day : : : : 30/June/2009 30/June/2009 reparation day reparation day 30/June/2009 30/June/2009 Product Name Product Name Product Name Product Name : : : : WIRELESS...
Page 2
Revision hysteresis. Date Edition number Revision content Writer 30/July/2009 First version First version publication T.Ogawa 2/14...
Page 3
■On safety design Though our company has paid close attention to quality, semi-conductive products can malfunction and fail. Our company has gone to great lengths to create a safe product which does not cause any injury accidents, fire accidents, public harm, etc., and incorporated safety features such as fire prevention and malfunction prevention into our design.
Contents 1.Application range 5 2.General specification 6 3.Usage 8 4.Radio specification 10 5.Precautions for each standard 11 6.Requirements to end product 13 4/14...
1.Application range 1-1 Application This specification is applied to the following. Product Name: WIRELESS MODULE Model Name : 1500#00-A (Model Number) 1-2 Applicable with Sony Computer Entertainment 『Playstation3』 ※1500#00-A is a radio module. This is a transceiver module and requires it to be placed within an external input device to operate.
2.General specification 2-1 Shape and dimension Dimension : Approximately 30mm× 39mm× 12mm Mass : About 8g 2-2 Operational temperature and humidity range (In operation) Temperature : 0℃∼+40℃ Humidity : 20∼25%RH (Assuming there is no dew condensation.) 2-3 Storage temperature and humidity range (In storage) Temperature :...
Page 7
2-6 Connection unit number 1500#00-B communicates one-to-one with 1500#00-A. A maximum 7 sets of 1500#00-A and 1500#00-B, can be connected to one 『Playstation3』. Also, in the presence of multiple『Playstation3』, a maximum 25 sets of 1500#00-A and 1500#00-B can be connected simultaneously. 2-7 Power Input voltage :...
3.Usage Connection method ① The HP3-1500A is mounted on an external device as part of the controller. ※From this point forward, the device will be referred to as controller with 1500#00-A mounted. ② 1500#00-B is connected with the USB port of the Playstation3 console. ③...
Page 9
Input PROG It is not used. Input − It is not used. Input Power Ground(0V) Input RESET Normal:Hi Active:Low Input ○ Inside pull-down Normal:Low Active:Hi Input □ Inside pull-down Normal:Low Active:Hi Input × Inside pull-down Normal:Low Active:Hi Input RIGHT Inside pull-down Normal:Low Active:Hi Input...
4.Radio specification General specification Value/Note Parameter Modulation system GFSK Spectrum diffusion process Frequency hopping Number of channels 25ch Frequency range 2405MHz∼2477MHz IC transmission output 0dBm[Max.] Data rate 1Mbps[Max.] Rock crystal vibrator frequency 16MHz Operating voltage DC+1.8V∼3.3V(Supply from 2 batteries.) 4-2 Channel frequency Channel Frequency [MHz] 2405...
5.Precautions for each standard 5-1 FCC ClassB CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 12
5-3 IC and FCC(Radio) RF exposure compliance 1) To comply with FCC/IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. 2) This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
6.Requirements to end product This module must be integrated only by OEM integrators under the following conditions. (1) OEM integrator has to be aware not to provide information to the users regarding how to install or remove this module in the user’s manual of the end product which integrate this module.
Page 14
(6) Compliance statement to FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the 1500#00-A Series and is the answer not in the manual?
Questions and answers