Advertisement
Available languages
Available languages
*
Disassemble as the picture (refer to the Set disassembly diagram) and remove the
current battery from BAT1, then insert the new battery.
- Pull back the holder on the left of the battery
- Hold both sides and remove the battery
- Replace with the new battery
>
no-power
NO-POWER
Is the power cord connected?
Yes
Is the Power switch turned on?
Yes
Check the u-Vending internals.
(Contact a service center.)
>
No - Sound
No - Sound
Is the speaker cable
connected?
Yes
Is the volume
level normal?
(Refer to uVending
management Software.)
Yes
Check the u-Vending internals.
(Contact a service center.)
No
Connect the power cord.
No
Turn on the Power Switch
No
Connect the speaker cable.
No
Increase the volume.
Complete
Complete
14
Advertisement
Chapters
