Phone layout Keys and Parts 12 11 Brief Intro to the Phone Charging the mobile phone The mobile phone uses a rechargeable battery. Note: Please use the specific battery, otherwise it may cause explosion. New battery needs charging and discharging completely three times (the time for every charging should be around 12 hours). It is recommended to charge the mobile phone after it turns off automatically due to low battery power. a. Plug the charger into the power supply, then plug the USB connector into the USB jack correctly. ...
b. In the “On” state, if the connection succeeds “Charger connected” will display on the screen. c. After the battery is full charged, the icon is full of bars. Basic operation 1. Switch on Insert SIM card and SD card, install battery, restore the battery cover and press the power key for several seconds or so to turn on the device. 2. Switch off Press the power key for several seconds or so to turn off the device. 3.
Page 4
Press call 1/call 2 key to answer an incoming call; press End/Power key to reject the call. 6. Speed dial Tap main menu key, go to main menu > Phone book‐>option‐>phone book setting‐> Speed dial, set speed dial On and set numbers. While on standby mode, long press any of the number keys from 2~9 to make a speed dial call. 7. Latest calls The device can store 10 latest calls logs. In standby mode, press call1/call 2 key and the call logs from SIM 1 or SIM 2 will display. 8. Options during call While engaged in a call, you can tap center OK key and you can use the following options: a.
f. Sound recorder: you can start to record the call. g. Mute: Mute/Unmute. h. Volume:When you are engaged in a call, you may press Up or Down n avigation key to tune the volume 9. Connect to voice mail (Network dependent) The handset allows you to transfer the incoming call into the voicemail and then you can receive a notice with voice message. The number of the voicemail center must be set first. Frequently Asked Questions 1). How to lock/unlock keypad? ‐ To auto lock: You can tap Main menu (Center) key > Settings > Phone settings > security settings > phone security > screen auto lock, you can set Off or 15sec,30sec,1min,5min, to auto lock the keypad. ...
Page 6
Phone security > Phone lock, you will be asked for “input phone password”, please input “1122”. After you activated the phone lock, you would be asked for a password the moment you power on the device next time, please input “1122” again. ...
Page 7
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types i128 (FCC ID: WA6I128 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the head is 0.2468W/kg and when...