LodgMate PMK3 Instruction Manual

Control panel button description

1:ALARM CLOCK

Important Safety Instructions

• The instruction manual contains important operating and maintenance instructions. For
your safety, please refer to the manual before operating.
• Do not hit or drop the unit.
• Do not expose the unit to vibration, direct sunlight, extreme temperatures, or humidity.
• Do not disassemble the unit by yourself. Call National Hospitality at 1-800-526-8224
for technical questions.

Power Supply

• Connect the power cord to a wall outlet or power source. Once plugged in, turn the red button
(SWITCH) on back of unit from OFF to ON/RESET. Light will illuminate and the DISPLAY SCREEN
will appear.
• Input Power: 100-240V – 50/60 Hz
• Output Power: DC 5V/3200mA

Battery Power (Optional)

• Insert two AAA batteries on the bottom of the unit. In the event of a power outage,
batteries will allow clock to remain functional.

Time Setting for Clock Year/Month/Day

1) Press and hold the ALARM CLOCK button to enable year / month / day settings. Settings are editable
when flashing.
2) Use UP / DOWN buttons to enter the selected year. Confirm the selection by pressing the
ALARM CLOCK button.
3) Use UP/DOWN buttons to enter the selected month (m). Confirm the selection by pressing
the ALARM CLOCK button.
4) Use UP/DOWN buttons to enter the selected day (d). Confirm the selection by pressing the
ALARM CLOCK button.
LodgMate LED Alarm Clock (#PMK3)
Instruction Manual
2:DST 3:SNOOZE / DIMMER 4:DOWN 5:UP