Related Manuals for Yard Craft Elevated Garden Planter
Summary of Contents for Yard Craft Elevated Garden Planter
- Page 1 Natural Cedar ELEVATED GARDEN PLANTER Assembly Manual GARDEN BED KIT CREATES UP TO 9 SQ. FT. OF GARDEN SPACE Elevated Garden Planter 7.6 Cubic feet of soil to fill • Creates 9 square feet of garden area •...
-
Page 2: Parts List
Elevated Garden Planter Assembly Manual Parts List (4) 1x3 Post Boards (4) 1x4 Post Boards (2) Long Bottom Rail (2) Short Bottom Rail Boards Boards (2) Long Top Rail Boards (2) Short Top Rail Boards (4) Post Supports (8) Shelf Boards... - Page 3 Elevated Garden Planter Assembly Manual Step: 2 Step: 1 Align Here Pre-drilled Holes Fasten the 1x4 Post Board onto the 1x3 Post Board with Place a Post Support between the two Post Boards. 1 5/8” Screws through pre-drilled holes. Make sure the Align with the end of the Post Boards and fasten Post Boards are in the correct position.
- Page 4 Elevated Garden Planter Assembly Manual Step: 8 Step: 7 (6) 1 1/4” Screws at each end Notice the grooves in the Side Boards Place the Long Side Boards into the notch in the Long Keeping all the Posts level both ways, repeat step 9 to Bottom Rail with the groove down.
- Page 5 Elevated Garden Planter Assembly Manual Step: 14 Step: 13 Align here 2” Screws Align the top of the Top Rails and fasten the Short Top Carefully lay the assembly on it’s side. Rail to the Long Top Rail using 2” Screws through pre- drilled holes.