Summary of Contents for LodgMate Towel Shelf
- Page 1 Tools Required: ✓ Drill ✓ Phillips Screwdriver ✓ Level ✓ Pencil for marking hole positions Note: Installation is easier and quicker with two people...
- Page 2 Step 1: Unscrew the hex bolts from the towel shelf and reattach them through the upper (hole position 2) wall flange/wall plate set as shown. Step 2: Unscrew the bolts from the towel bar and reattach them through the lower (hole position 3) wall flange/wall plate set...
- Page 3 Step 3: Holding the assembled towel shelf in the desired position on the wall, mark the position of the upper (hole position 1) and lower (hole position 4) holes for the left side of the assembled shelf, ensuring that the vertical edge is level.