Page 1
WELDING HELMET FLIP FRONT (4-1/2” x 5-1/4”) Model 45940 OPERATING INFORMATION ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
If there is any doubt, do not attempt to use this product. INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS. DO NOT OVERREACH. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etcetera. SKU 45940 PAGE 2 REV 8/01...
Use aprons, cape-sleeves, shoulder covers, and bibs designed and approved for welding and cutting proce- dures. When welding or cutting overhead or in confined spaces, wear flame resistant ear plugs or ear muffs to keep sparks out of ears. 45940 PAGE 3...
Page 4
WARNING: This product, when used for welding and similar applications, con- tains or produces a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code 25249.5 et seq.) SJY 45940 PAGE 4...
If a malfunction of any parts occur, discontinue using the Welding Helmet immediately and have the problem cor- rected before further use. Do not use damaged equipment. SKU 45940 PAGE 5 REV 03/04...
#10 Shade Lens Adjustable Headband Lens Clip Side Knob Retainer Plug Swivel Mount Side Screw Side Swivel NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 45940 PAGE 6...