Advertisement
Quick Links
Floor Mounted Unit
Please retain for future reference
Installation and Fitting Instructions
Before you start
It is recommended that the unit and basin are secured to a suitably reinforced wall to ensure stability. Place the furniture
unit in the desired position. Secure unit to the wall through the pre-drilled holes in the rear brace using xings suitable for
the wall surface (not supplied). If in any doubt please consult an expert.
Wear suitable eye protection when drilling. Take care when using power tools near water - the use of a residual current
device (RCD) is recommended. Beware of hidden pipes or cables. Take care when drilling tiled surfaces as the drill might
slip. Use a piece of masking tape to prevent the drill from wandering.
Fitting Basin
Once the basin is plumbed in nish by securing to the washstand with a silicone sealant (not supplied).
Hinge Adjustment
1
PL5010. x, PL6010.x, INST04102x
A
B
Quick
release
mechanism
Customer Services
t: 01225 303900
2
To make
adjustment 1
simply turn screw
B
To make
adjustment 2
simply turn screw
A
11/16 .V2
Advertisement
Summary of Contents for Bathroom Solutions PL6010 series
- Page 1 Floor Mounted Unit PL5010. x, PL6010.x, INST04102x Please retain for future reference Installation and Fitting Instructions Before you start It is recommended that the unit and basin are secured to a suitably reinforced wall to ensure stability. Place the furniture unit in the desired position.
- Page 2 Furniture Aftercare Instructions As with all wooden furniture, this unit should be treated with care: We recommend... Please DO NOT... Wipe away any water splashes or condensation after use. Excessive Do not scrub or scour exposure to water will deteriorate the WIPE AWAY furniture.