Download Print this page

Gojo LTX Installation Procedure

Activity monitoring system transmitter module

Hide thumbs Also See for LTX:

LTX

transmitter module installation procedure

! Warning (In according to FCC part 15.19):

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that

may cause undesired operation.

! Caution (Pertaining to FCC part 15.21):

Modiﬁcations to this equipment not expressly approved by GOJO Industries, Inc. could

void the user's authority to operate the equipment.

This unit is certified to FCC Part 15 Part C for intentional unlicensed radiators. FCC ID O76-T4SG0910A

Activity Monitoring System

Table of Contents

Need help?

Do you have a question about the LTX and is the answer not in the manual?

Page 1 ! Caution (Pertaining to FCC part 15.21): Modiﬁcations to this equipment not expressly approved by GOJO Industries, Inc. could void the user's authority to operate the equipment. This unit is certified to FCC Part 15 Part C for intentional unlicensed radiators. FCC ID O76-T4SG0910A...
Page 2 Press the LTX door latches inward Pull the top of the door forward. to release the door. Remove and discard the Use a flathead screwdriver to lift the slot slot cover. cover away from the cabinet. Remove the LTX trans-...
Page 3 Battery tab Remove the battery tab to apply power to the LTX Insert the module cable into the jack on the dispenser. front of the pump house, and press in firmly to secure the plug.