ESC PGEN-30 Manual

For use under U.S. Patents
8,720,591, 9,144,700 and 9,186,533

Ordering Information

Stock Number: PGEN-30 (PGEN-30E)
Replacement Filters: PGEN-FKS - Annual Maintenance
Gas Membrane: PGEN-MS - 20 Year Expected Service Life)

General Description

The ECS Protector Nitrogen Generator is designed for
use in maintaining supervisory gas and facilitating the
Dry Pipe Nitrogen Inerting (DPNI) process for
controlling oxygen corrosion in dry and pre-action fire
sprinkler systems. The ECS Protector is an on-site
nitrogen generation system that is designed to be
installed inline between the compressed air supply
and the sprinkler system riser in dry or preaction pipe
sprinkler systems. The nitrogen generator utilizes
Engineered Corrosion Solutions  11336 Lackland Road  St. Louis, MO 63146  Phone 1-314-432-1377 www.ecscorrosion.com
ECS Protector Nitrogen Generator PGEN-30 (PGEN-30E)
ECS Protector Nitrogen Generator
PGEN-30 (PGEN-30E)

Specifications

Dimensions (cabinet):
Dimensions (incl. bypass): 32.5"(W) x 52.5"(H) x 8.5"(D)
Weight:
Temperature Range:
Power Supply:
Power Consumption:
Gas Connections:
Drain Connection:
membrane gas separation technology that exhausts
oxygen as a waste gas to produce 98%+ nitrogen on
demand with no nitrogen storage necessary for dry or
preaction systems.
The ECS Protector Nitrogen Generator cabinet has an
external bypass valve to allow for nitrogen generator
maintenance or "fast fill" needs, and is designed to
meet the NFPA 13 30-minute fill requirement for dry
pipe or preaction fire protection systems.
1
ECS Protector
Nitrogen Generator
designed for fire sprinkler systems
24.5"(W) x 52.5"(H) x 8.5"(D)
(622mm(W) x 1,334mm(H) x 216mm(D))
(826mm(W) x 1,334mm(H) x 216mm(D))
152 Lbs (69 Kg)
40°F - 105°F (5°C - 40°C)
120v/1 phase/60Hz - Dedicated Circuit
(230v/1 phase/50Hz - Dedicated Circuit)
2 Amps
Air Inlet - ½" NPT Female
Nitrogen Outlet - ½" NPT Female
¼" NPT Female
UL 508A Listed Industrial Control Panel
June 2018 - Rev 5