Page 1
Puzer Easy The small and handy central vacuum cleaner of the Puzer collection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
Page 2
Specifications Mounting the central unit Using the system Servicing Troubleshooting The features of the Puzer Easy circuit board Installation of additional suction outlets Important safety instructions PLEASE KEEP THIS MANUAL FOR FUTURE USE NB! Read all the safety instructions and •...
The benefit of Easy is that the exhaust air does not circulate the air in the whole apartment like with a normal vacuum cleaner. Easy on is very silent and effective.
Page 4
INSTALLING THE CENTRAL VACUUM CLEANER There are detailed instructions on how to mount the Puzer dust piping system and suction outlets. These instructions are included in your piping system delivery. 1. Fasten the filter unit 2. Tighten the faste- 3. Fasten the connec- 4.
USING THE SYSTEM Puzer Central Vacuum Cleaner is easy to use. If your system includes a suction hose with a handle switch, push the hose to the suction outlet as in- dicated by the image ( ). Now you can start and stop the system using the switch in the handle of the suction hose.
Page 6
MAINTENANCE OF THE CENTRAL VACUUM CLEANER MAINTENANCE AND CLEANING OF THE FILTER 3. Pull the filter out 1. When changing/ 2. Pull the cover out 4. Push the upper cleaning the filter, edge of the filter cover and slightly down- in a slightly diagonal position the same way back to its position.
TROUBLESHOOTING NOTE: 230 V ELECTRICAL WORK CAN ONLY BE CARRIED OUT BY A PROFESSIO NAL WHO IS AWARE OF ALL THE SAFETY REGULATIONS. THE VACUUM CLEANER DOES NOT START LOW SUCTION - Are all the suction outlets properly fitted? - Is the central unit connected to the mains? - Has something got stuck in the suction outlet? - Is the wall socket supplied with electricity? - Is the low voltage cable connected to the filter unit of...
Page 8
FEATURES OF THE PUZER EASY CIRCUIT BOARD 1 - SOFT START The start peak is limited with a TRIC relay, this way the start power is delivered to the motor with a delay of 1 second. The start voltage is significantly smaller and the stress of the fuses, network and motor decreases.
Need help?
Do you have a question about the Easy and is the answer not in the manual?
Questions and answers