Initial Settings - JVC LT-23E31BJG Service Manual

Initial settings

When the TV is first turned on, it enters the initial setting
mode. Follow the instructions on the on-screen display to
make the initial settings.
BACK
___ ___
PC
1 Make sure to set the VCR/TV/DVD switch to the
TV position.
• You cannot turn the TV on when the VCR/TV/DVD
switch is set to the VCR or DVD position.
2 Press the button on the remote control
After a short interval the power lamp changes from red
to green.
• Check that the AC plug on the power cord from the
TV is connected to AC outlet.
VCR/TV/DVD
Switch
Yellow button
Blue but ton
OK
Power lamp
Remote control
Remote control
sensor
sensor
3 AUTO PROGRAM menu appears.
AUTO PROGRAM
LANGUAGE ENGLISH
COUNTRY UK
A .P .S
: SELECT :MOVE
4
P he buttons to choose the
ress t
/
LANGUAGE.
5 P
ress t
he buttons to choose the ENGLISH.
/
The on-screen display will then be in English.
6 P
ress t he and buttons to choose the
/
/
country where you are.
7 P
ress t
he buttons to choose the
/
Then press buttons.
A.P.S.
/
A.P.S.
START
OK : START
8 Press the OK button to start A.P.S.
A.P.S.
A.P.S. IS RUNNING
MENU : EXIT
The AUTO PROGRAM menu appears and received TV
channels are automatically stored in the programme
numbers.
• To cancel the AUTO PROGRAM function:
Press the MENU button.
After the TV channels have been registered in
the programme numbers, the PROGRAM
menu appears
• If you want to, you can now edit the programme
numbers using the PROGRAM function.
For details, see "To edit the PROGRAM menu" on
page 22.
.
7