Advertisement
When connect the power adapter to back panel power Jack 。The power LED Will Turn ON
to indicate power has been applied.
Power LED
C：Check WWAN LED
When Power ON the BPR1000, The BPR1000 Will Auto to detect and initial
。Then status LED Will Flash ON and OFF One by one as BPR1000 Performs initialization
Card
and Internet connection process。BPR1000 Will Auto Configured properly for your Internet
Service Account。It Will take a few minutes。
When Complete, the status LED Will illuminate Green。Please refer the below Status
LED Activity table for each State。
LED Color
None
Green + Red
Green
Green
BCM
BPR1000-PU/BPR1000-U/MOR600-N
Activity
Always On
Always On
Flash at Same Time
4
No Data Card Inserted or No
None
Internet Connection
System Initialization State
High Speed Internet
Connection
Low Speed Internet
Connection
V 0.1
Your Date
State
Advertisement
