Hybrid usb hdtv tv tuner with fm radio & remote control (18 pages)
Summary of Contents for Sabrent TV-USBHD
Page 1
(ATSC DIGITAL/CLEAR QAM/NTSC ANALOG) Driver Installation: 1. Connect your TV-USBHD dongle into an open USB 2.0 port on your computer. 2. Insert the software disc into your computer’s disc drive. When prompted, click on Run AUTORUN.EXE: 3. Click on Install Driver:...
Page 2
5. Click OK: 6. Click on the Start Button. Type Device Manager into the search box, and click on Device Manager: 7. Click on the arrow to the left of the section labeled Sound, video and game controllers. Verify that the three entries below appear, as shown below:...
Page 3
BlazeVideo HDTV Player Installation: 1. Click on Install Blaze HDTV Player: 2. Select your language, and click OK: 3. Click Next:...
Page 4
4. Click on I accept the agreement and click Next: 5. Click on Next:...
Page 5
6. Click on Install: 7. Click on Finish:...
Page 6
8. Click on the Start Button and open BlazeDTV 6.0: 9. Fill in the three sections shown below. Click Register: 10. When prompted, click OK:...
Page 7
11. Click on the Start Button and open BlazeDTV 6.0: 12. Click on the Open icon. Select your input source. Please note: ATSC should be selected for ATSC Digital TV and Analog should be selected primarily for Cable TV. 13. Select your Video Source, and click OK:...
Page 8
14. Click OK: 15. Select your signal and your County or Region, and click OK: 16. Click the checkbox next to Close this dialog box… Wait for the scan to complete:...
Page 10
ArcSoft TotalMedia 3.5 Installation: 1. Insert the software disc into your computer’s disk drive. Explore the disc contents and run Setup.exe: 2. When prompted, click OK: 3. Click Next:...
Page 11
4. Click Yes: 5. Fill in the three sections shown below. Click Next:...