Table of Contents
Advertisement
Programming the Features
DIC = Driver Information Center
RKE = Remote Keyless Entry
With the ignition key ON and the vehicle in PARK
(P), press the appropriate memory button "1" or "2"
on the driver's door trim panel that corresponds to
the number on the back of the RKE.
DIC readout on INSTRUMENT CLUSTER
Press INFO until FEATURE PROGRAMMING appears
in the DIC, then press ON/OFF to select feature as
shown below.
Press INFO RESET to exit programming at any time,
and your changes will be saved.
To start programming, press the INFO button until
FEATURE PROGRAMMING appears in the DIC.
Press the ON/OFF button to enter Feature
Programming. Press down on the INFO button to
DIC controls located to right of cluster
scroll through the menu. To exit, press the INFO
RESET button.
NOTE: Shaded areas are for vehicles equipped with the Memory Package.
Refer to Owner Manual for more information.
Reviewed with Customer (Please Check Box)
Driver
Audio Systems
Convenience
Personalization
Maintenance
Information
Features
Guide
Advertisement
Table of Contents
