Advertisement
Quick Links
SERVICE INFORMATION - AGITATOR ASSEMBLY FOR
Binks is a registerd trade mark of Illinois Tool Works Inc
25 Litre (5 Gall) PAIL
MODELS - 41-3312-CE & 31-133-CE
EN
EN
P 1 - 8
F
P 9 - 15
F
IT
P 30 - 36
IT
D
D
P 16 - 22
NL
P 23 - 29
NL
Page 1
Part Sheet
77-2877 R1
© ITW Inc 2007
Advertisement
Summary of Contents for Binks 41-3312-CE
- Page 1 P 1 - 8 P 16 - 22 P 9 - 15 P 23 - 29 P 30 - 36 Part Sheet 77-2877 R1 Page 1 Binks is a registerd trade mark of Illinois Tool Works Inc © ITW Inc 2007...
- Page 2 All models are certified for use in Hazardous areas, Zone 1 for areas around the tank and Zone 0 for inside the tank. Temperature class T5 (100˚C). Page 2 Binks is a registerd trade mark of Illinois Tool Works Inc © ITW Inc 2007...
- Page 3 3. temperature of 185ºC for T4 and 150ºC for T5 equipment. Page 3 Binks is a registerd trade mark of Illinois Tool Works Inc © ITW Inc 2007...
- Page 4 1000 rpm. Do not exceed 4. Loosen the top 2 screws (11) in the 4. Slide the washer (10) over the shaft, the Page 4 Binks is a registerd trade mark of Illinois Tool Works Inc © ITW Inc 2007...
- Page 5 Snap-in blank, 1/2” pipe thread 15 20-2601 Thumb screw, 3/8-16 x 1-1/2 Fig. 2 16 20-2603 Snap-in blank, 1” pipe thread 17 41-626 Cover 41-3205 Lid Assembly Page 5 Binks is a registerd trade mark of Illinois Tool Works Inc © ITW Inc 2007...
- Page 6 Drive End Plate 25 37-527 Dowel Pin 26 37-525 Bearing Drive End Plate *27 37-526 Seal 28 20-3266 Screw 6-196 Motor repair kit Fig. 3 Page 6 Binks is a registerd trade mark of Illinois Tool Works Inc © ITW Inc 2007...
- Page 7 Use larger bore airline and/or pressure of airline. shorten airline. Exhaust restricted Change muffler filter or flush motor or strip and clean. ACCESSORIES 5 Gallon Pail 41-662 Page 7 Binks is a registerd trade mark of Illinois Tool Works Inc © ITW Inc 2007...
- Page 8 Page 8 Binks is a registerd trade mark of Illinois Tool Works Inc © ITW Inc 2007...