LCD screen. The AS350 B3 is powered with a TURBOMECA ARRIEL 2 engine of 847 shp (632 kW) and equipped with a dual channel FADEC system (Full Authority Digital Engine Control). This engine makes it perfectly suited for operations in conditions such as mountainous or elevated areas or hot and dry areas.
Page 14
With its wide, unobstructed 5+1 cabin (6 + 1 in high density) and its high cruising speed, range and payload, the AS350 B3 can carry more passengers on more round-trips per day than any other helicopter in its class. The helicopter has been designed to provide its occupants with the highest level of comfort. In addition to the low vibration level, the passengers will appreciate the feeling of spaciousness and the panoramic view offered by the large windows.
Page 18
It fits all types of utility missions, because it has been designed with adaptability in mind. The AS350 B3 can be configured and easily re-configured, with a long list of optional equipment for whatever utility mission in mind. With its lifting power, endurance and heavy-duty composite materials construction, the AS350 B3 is always up for the most arduous hot and high missions and sling work.
Page 20
The exceptional lifting power, high endurance and extended range of the AS350 B3 make any job looks easy. The AS350 B3 can climb to 3,000 meters in 2 minutes and 21 seconds and has more then proved its performance when it landed on the Mount Everest in a record-breaking event.
Page 24
Corporate transport configuration (STYLENCE) In the corporate configuration, the AS350 B3 can transport up to four passengers in roominess and comfort that is usually not found in a light helicopter. In addition to the exceptional low vibration level, travellers will appreciate the ample leg room.
Page 28
Technical Data List of optional equipment This chapter includes all the optional equipment that can be selected to customize the AS350 B3 helicopter. Please take note that there can be incompatibilities between optional equipments. Any configuration made by using this list of optional equipment should be made with the assistance of the latest issue of the Table of Constraints, or validated by a EUROCOPTER sales representative.
Page 37
Technical Data Vendor mission equipment The purpose of this list is to specify some mission equipments that may be installed on the AS350 B3 helicopter in order to fulfil specific operational needs. These equipments are not certified by EUROCOPTER and thus are not part of EUROCOPTER’s list of optional items. This list is provided for information purposes only, and is not to be considered as EUROCOPTER’s recommendation for one type of mission equipment.
Page 64
EUROCOPTER training centers provide a wide range of courses and services, from basic training up to preparation for the most sophisticated civil and military missions. As part of the full range of services on offer, EUROCOPTER also plays an active role in helicopter pilot development through its Ab Initio programs.
Page 67
Eurocopter reserves the right to make configuration and data changes at any time without notice. The facts and figures contained in this document and expressed in good faith do not constitute any offer or contract with Eurocopter...
Need help?
Do you have a question about the AS350 B3 and is the answer not in the manual?
Questions and answers