Page 1
Armada Technologies Pro65 Plastic Pipe Tracing Rod with Sonde Instruction Manual...
Page 2
65 feet in length. It has a small diameter, which means it can fit into smaller pipes than most other tracing rods or fish tapes. The Pro65 can be used in two ways; tracking the entire rod, or tracking only the sonde at the end of the rod.
Page 3
frequency, you can use either one for this application, though we’d recommend using the Hi setting of 33 kHz. 2. Now use your receiving wand to track the signal of the rod through the pipe, just like you would track any other underground wire or cable.
Page 4
Pro900 locator to track the sonde, as those two locators have a Hi frequency that uses a 33 kHz signal. 1. Insert the Pro65 tracing rod into the pipe as far as it will 2. Then connect the red alligator clip of your wire tracker to the red knob on the Pro65, and connect the black alligator clip to the other knob next to the red one.
Page 5
Technologies will repair or replace any component that is returned to Armada Technologies within 12 months of purchase and does not exhibit signs of abuse or misuse. It is Armada Technologies sole discretion to determine this condition. Armada Technologies also reserves the right to require a proof of purchase in order to determine date and validity of purchase.
Need help?
Do you have a question about the Pro65 and is the answer not in the manual?
Questions and answers