Advertisement
Technical data
Semiconductor Output
Output
IL 8839.95:
Output voltage:
Min. output voltage U
:
ON
Clearance and creepage
distances
I
max.
EMC
Electrostatic discharge:
HF irradiation:
Fast transients:
Surge voltages
between
wires for power supply:
between wire and ground:
Interference suppression:
Degree of protection:
Housing:
Terminals:
Housing:
Vibration resistance:
Climate resistance:
Terminal designation:
Wire connection:
Wire fixing:
Mounting:
Weight:
Dimensions
Width x height x depth:
Standard type
IK 8839.11 AC 230 V 50 Hz 1 A
Article number:
• Output:
• Auxiliary voltage U
:
H
• Switching point:
• Width:
E. DOLD & SÖHNE KG • D-78114 Furtwangen
e-mail: dold-relays@dold.com • internet: http://www.dold.com
Transistor
DC 24 V (0 ... 30 V)
< 0.3 V
4 kV / 2
5 A
8 kV (air)
IEC/EN 61 000-4-2
10 V / m
IEC/EN 61 000-4-3
2 kV
IEC/EN 61 000-4-4
1 kV
IEC/EN 61 000-4-5
2 kV
IEC/EN 61 000-4-5
Limit value class B
EN 55 011
IP 40
IEC/EN 60 529
IP 20
IEC/EN 60 529
Thermoplastic with V0 behaviour
according to UL subject 94
Amplitude 0.35 mm IEC/EN 60 068-2-6
Frequency 10 ... 55 Hz
20 / 060 / 04
IEC/EN 60 068-1
EN 50 005
2
2 x 2.5 mm
solid or
2
2 x 1.5 mm
stranded ferruled
DIN 46 228-1/-2/-3/-4
Terminals with self-lifting
clamping piece
IEC/EN 60 999-1
DIN rail
IEC/EN 60 715
70 g
17.5 x 89 x 58 mm
0010172
stock item
1 changeover contact
AC 230 V
1 A
17.5 mm
Variants
IK 8839.11/100:
IK 8839.11/001:
IK 8839.01/150, IK 8839.05/150
IK 8839.01/250, IK 8839.05/250: with High current terminals
IK 8839.01/150:
IK 8839.05/150:
IK 8839.01/250:
IK 8839.05/250:
Ordering example for variants
IK 8839 .11 / _ _ _
AC 230 V
Specification for tender for IK 8739
Current monitor according to IEC/EN 60 255, DIN VDE 0435-303 to be
built in consumer units. Switching point AC 0.175 A ... 5 A permanent,
can be overloaded for a short time for 2 s ... 16 A. 1 changeover
contact.
Width 17.5 mm
Type IK 8839
Manufactured by E. DOLD & SÖHNE KG
Current monitor according to IEC/EN 60 255, DIN VDE 0435-303 to be
built in consumer units. Switching point AC 0.175 A ... 20 A permanent,
can be overloaded for a short time for 2 s ... 150 A. 1 changeover
contact.
Width 17.5 mm
Type IK 8839
Manufactured by E. DOLD & SÖHNE KG
Current monitor according to IEC/EN 60 255, DIN VDE 0435-303 to be
built in consumer units. Switching point AC 1.0 A ... 20 A permanent,
can be overloaded for a short time for 2 s ... 150 A. 1 changeover
contact.
Width 17.5 mm
Type IK 8839
Manufactured by E. DOLD & SÖHNE KG
•
PO Box 1251 • Telephone (+49) 77 23 / 654-0 • Telefax (+49) 77 23 / 654-356
2
with an inverted output
with a fixed operate delay
180 ... 300 ms
max. 16 mm
2
solid
max. 6 mm
2
stranded wire with sleeve
DIN 46 228-1/-2/-3/-4
with a fixed switching point AC 1.0 A,
permanent maximum load: 40 A,
1 NO contact
same as IK 8839.01/150, except with
1 NC contact
same as IK 8839.01/150, except with
an inverted output
same as IK 8839.05/150, except with
an inverted output
50 Hz 1A
Switching point
Nominal frequency
Auxiliary voltage
Variant, if required
Contacts
Type
IK 8839, IL 8839 / 11.06.07 e
Advertisement
