Summary of Contents for 3M SelfCheck System V Series
Page 1
SelfCheck™ System V-Series, R-Series, and BCS Owners Manual 3M Security Systems Division 3M Center, Building 225-4N-14 St. Paul, Minnesota 55144-1000 78-8129-2528-3 Rev 1...
Table of Contents Safety information ....................1 Intended use..........................1 Safety information for the V-Series Models 6410, 6420, and 7410 ........3 Safety information for the V-Series Tabletop Models 6412, 6422, 7412, and 7422 .....4 Safety information for the R-Series Model 8410..............5 Safety information for the BCS Model 9410................6 V-Series label locations ......................7 V-Series Tabletop Unit label locations ..................8...
The V-Series and R-Series models can be installed into a desk unit from 3M or into furniture provided by the customer. The V-Series Tabletop Models 6412, 6422, 7412, and 7422 and the BCS Model 9410 is intended for use on a desktop provided by the customer.
Page 6
Disconnect power before servicing. Unit contains high voltage electrical circuits that must be discharged and checked for voltage prior to servicing. Service should be performed only by 3M factory trained service personnel. Display Unit: Mercury disposal hazard CAUTION LASER LIGHT...
To reduce the risk associated with fire due to modification or incorrect installation of system components or the use of non-approved replacement components: Do not attempt to modify or repair—no user serviceable parts—contact 3M Service for repair. Use approved system components installed by 3M service personnel only.
To reduce the risk associated with fire due to a user or installer attempting to service the SelfCheck unit: • Do not attempt to modify or repair — no user serviceable parts — contact 3M Service for repair; • Use approved replacement components, installed by 3M Service personnel only.
To reduce the risk associated with fire due to modification or incorrect installation of system components or the use of non-approved replacement components: Do not attempt to modify or repair—no user serviceable parts—contact 3M Service for repair. Use approved system components installed by 3M service personnel only.
To reduce the risk associated with fire due to modification or incorrect installation of system components or the use of non-approved replacement components: Do not attempt to modify or repair—no user serviceable parts—contact 3M Service for repair. Use approved system components installed by 3M service personnel only.
Disconnect power before servicing. Unit contains high voltage electrical circuits that must be discharged and checked for voltage prior to servicing. Service should be performed only by 3M factory trained service personnel. One of these labels Model 7410 SelfCheck Model 6410 SelfCheck...
This Class A digital apparatus also meets all requirements prior to servicing. Service should be performed of the Canadian Interference-Causing Equipment Regulations. only by 3M factory trained service personnel. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
R-Series label locations 78-8126-7512-8 100 - 240V~ 50/60 Hz N1108 78-8126-7519-3 100 - 240V~ 50/60 Hz I. T .E. LISTED ACCESSORY 12A MAX LOAD 4P24 CAUTION N1108 LASER LIGHT DO NOT STARE INTO BEAM 0.95 mW at 630-670 nm CLASS 2 LASER PRODUCT 21 CFR Subchapter J, IEC 60825-1:1997 and EN 60825-1:1996...
NO MODIFICATIONS. Modifications to this device shall not be made without the written consent of The 3M Company. Unauthorized modifications may void the authority granted under Federal Communications Commission Rules permitting the operation of this device.
Overview Welcome to the 3M™ SelfCheck™ System. The SelfCheck system enables library customers to check library materials in and out by themselves. The system emulates the check-in and checkout procedures performed by library staff. In addition, the system can optionally operate in offline mode when the library's automated circulation system is unavailable.
Component Dimensions Weight Electrical 3.25 in. × 3.0 in. × 32.25 in. (max.) 1.24 lb 100–240 VAC, 12.0 A Appliance 8.26 cm × 7.62 cm × 81.9 cm 0.56 kg coupler V-Series Tabletop Unit specifications System physical characteristics 31.0 inches (78.7 cm) Height 36.0 inches (91.4 cm) Width...
Component specifications Component Dimensions Weight Electrical 16.1 in. × 10.2 in. × 15.7 in. 16.3 lb 12 VDC, 2.0 A Touch screen 40.9 cm × 25.9 cm × 39.9 cm 7.4 kg 2.59 × 1.38 × 3.47 7.5 oz 24 VDC, 300 mA Scanner 6.58 cm ×...
To reduce the risk associated with fire due to modification or incorrect installation of system components or the use of non-approved replacement components: Do not attempt to modify or repair—no user serviceable parts—contact 3M Service for repair. Use approved system components installed by 3M service personnel only.
The optional smart card reader can be used for reading customer smart cards. Receipt printer The receipt printer is recessed into the cabinet that 3M provides and may be placed on the countertop in other installations. It is a thermal printer, which does not require toner or ribbons.
Workstation or 3M™ Conversion Station. The SelfCheck system uses the in- formation in the RFID tag to check materials in and out. It also turns on a security feature in the tag when it checks items in, and turns it off when it checks items out.
CAUTION To reduce the risk associated with environmental contamination due to the incorrect disposal of the lithium battery in the PC, mercury in the monitor/ display, and/or any circuitry that contains lead in the solder: At the end of service life, dispose of the V-cradle, coil driver box, interconnect box, appliance coupler, computer, monitor, and laser scanner in accordance with federal, state, and local requirements.
Touch screen monitor controls The SelfCheck system uses a touch screen monitor to guide customers through check-in and checkout. To adjust the display, use the monitor’s on- screen menu to adjust display characteristics, such as brightness, contrast, and color. Do not change the display resolution, for the default resolution is optimized for the SelfCheck system graphics.