REVERSING
The reverse lever is fitted with a ring with which to
change the gear.
To select a gear:
- the vehicle must be at a full standstill
- the engine must be idling
To move into drive or reverse gear:
1
-
lift the ring
-
push the lever to the required direction
-
release the ring once the gear is selected
Never force the change into drive or reverse gear
without lifting the ring first; doing so will damage
your vehicle beyond repair.
45
PARKING BRAKE
Do not park the vehicle on a slope of more than 15% and
place a wedge against a wheel if parking on a slope for a
long time.
INTERIOR REAR VIEW MIRROR
WING MIRRORS
Wing mirrors can be adjusted from inside with the lever button.
2
1.
To apply the brake, pull the lever
as far as it will go without pushing the
button on the end of the lever.
2.
To take the brake off, slightly pull
the lever, at the same time pressing
the button and lowering the lever
again.
The lever on the lower part is used
to reduce glare from vehicles'
headlights behind you when driving
at night.
Normal
1.
Anti-glare*
2.
1. Tilt up
2. Tilt down
3. Tilt right
4. Tilt left