Page 2
1. Lift off stainless steel shroud. 2. Cut the 4 corners of the box and lay the sides flat.
Page 3
3. Remove side door from magnetic clasps. 4. Insert 2 D-type batteries into battery holder.
Page 4
5. Lift gas burner slightly to ease installation of gas line into regulator. 6. Cut open 4 bags of glass gems and spread them evenly throughout the bottom of the burner as shown.
Page 5
7. Place a small layer of glass gems inside of wind guard to distribute gas flow evenly. 8. Center decorative stainless steel shroud on top of burner.
Page 6
9. Assemble glass guard kit using instructions provided in glass guard packaging. 10. Using provided stainless steel self-tapping screws and a drill with a 1/4 "hex head driver, secure glass guard fence in all 4 corners. Note: Drilling may require some force to penetrate through the stainless steel top.
Page 7
Modern Marvel TOP VENT EXHAUST Downtown, uptown, and 11. Unit is ready to be lit. To light unit, turn toggle everywhere in between, switch to "On" position. Unit will start to spark at tip of when looks matter, it’s your CONVECTIVE HEAT OUTSIDE AIR style.
Need help?
Do you have a question about the GreatCo Key Largo and is the answer not in the manual?
Questions and answers