Help Guide
Digital Paper System
DPT-RP1/DPT-CP1
Search
4-597-942-14(1)
Copyright 2016 Sony Corporation
Back
Back to Top
Calibrating the pen
Set the way you hold the pen, and correct any displacement
between where the pen touches the screen and where the
writing appears.
Press the
1
[Settings].
Tap [System Settings] — [Pen Calibration].
2
From the four variations of how to hold the
3
pen, select the variation that most
resembles your own grip, and then tap
[Next].
Use the pen to trace the dotted lines as you
4
would normally write.
A line does not appear atop the dotted line as you trace.
When you lift the pen, the line appears.
Displacement in the line that you drew will be corrected on
the following screen. Do not worry if this line is displaced.
Tap [Next].
5
The manual correction screen is displayed.
Tap the arrows that point up, down, left, and
6
right to move the line that you drew and
(home) button, and tap
Print
71