LG SL6Y Owner's Manual page 34

34 Operating
4. When this unit is successfully connected with
your Bluetooth device,
"PAIRED" [ your device' s name [ "BT" appears
on the display window.
,
Note
y If it is unavailable to display device name
on the unit, "-" will be displayed.
y To check the connected device' s name,
press J on the remote control. The
connected Bluetooth device' s name is
displayed.
5. Listen to music.
To play music in your Bluetooth device, refer to
3
your Bluetooth device' s user guide.
,
Note
y When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
However it may not work well in the case
below :
- There is an obstacle between the unit and
the Bluetooth device.
- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
,
Note
y If Bluetooth connection does not work well,
try pairing it again.
y The sound may be interrupted when the
connection has interference by the other
electronic waves.
y Pairing is limited to one Bluetooth device per
unit and multi-pairing is not supported.
y Depending on the type of the device, you may
not be able to use the Bluetooth function.
y You can enjoy Bluetooth function using
smart phone, MP3, Notebook, etc..
y The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
y Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets to far from the unit.
y When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
y When the unit is not connected, "READY"
appears in the display window.
y When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
y If you change to another function after
connecting Bluetooth, Bluetooth connection
will be disconnected. And you return to
Bluetooth function, Bluetooth connection
will be connected automatically.