Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Hallowell Manuals
  4. Tool Storage
  5. Workbench
  6. General instructions

Hallowell Workbench General Instructions

Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
HALLOWELL - WORKBENCH
GENERAL INSTRUCTIONS
1. Check material received against the packaging list. First check the number of packages recieved and then check the contents of
each package.
2. Check material recieved for damage. If damage has occured, secure a "damage notation" from the carrier.
3. Identify each part as it is unpacked and put like parts together as close as possible to the working area in which they are to be
assembled.
4. Be careful to use the correct hardware as specified in the assembly instructions.
5. Items with suffix (xx) are available
CAUTION
IN THE INTEREST OF SAFETY, ALL LOCKERS MUST BE SECURELY ANCHORED TO THE FLOOR AND/OR WALL. FOR
SAFETY, HANDLE ALL COMPONENTS CAREFULLY AND WEAR WORK-GLOVES WHEN ASSEMBLING LOCKERS.
INSTALL ALL UNITS PLUMB AND TIGHTEN ALL HARDWARE SECURELY. RETAIN INSTRUCTIONS FOR FUTURE
REFERENCE.
www.Hallowell-List.com
866-566-0500

Advertisement

loading

Summary of Contents for Hallowell Workbench

  • Page 1 HALLOWELL - WORKBENCH GENERAL INSTRUCTIONS 1. Check material received against the packaging list. First check the number of packages recieved and then check the contents of each package. 2. Check material recieved for damage. If damage has occured, secure a "damage notation" from the carrier.
  • Page 2 WORK BENCH ASSEMBLY HARDWARE 1. Bolt stringer to legs using harware (B) and (C) A. #14X3/4 C. 1/4-20 X 1/2 B. 1/4-20 2. Bolt adjustable legs using hardware (B) and STRINGER ADJUSTABLE LEGS (4) B & C WOOD TOP END CAP 3.

  • Page 3: Riser Assembly

    RISER ASSEMBLY HARDWARE 1. Use hardware (B) SHELF and (C) to attach Shelf to Risers and Supports. 2. Use harware (A) to attach Risers to Wood Top. A. #14X3/4 B. 1/4-20 C. 1/4-20 X 1/2 RISERS (2) END STOP ASSEMBLY SUPPORTS(2) WOOD TOP 1.

  • Page 4: Drawer Assembly

    DRAWER ASSEMBLY HARDWARE DRAWER TOP A. #14 X 3/4 DRAWER Remove Drawer Top from WOOD TOP Drawer. Use 4 (A) screws to attach Drawer Top to the underside of the Wood Top. Slide Drawer into Drawer Top. STEEL TOP HARDWARE DRAWER ANGLE Bolt Drawer angle to inside of Steel Top.
  • Page 5 Front of drawer top bolts to the edge of the steel table. Back of angles get bolted to the back of the steel table. Back of drawer top gets bolted to the front of the angle.